All Products

The Molex Mini-fit Female to Female ProSpeed jumper is used to join 2 ProSpeed 4-LITE dimmers together using their Molex Connectors. These are great if you are using the 7.62mm Phoenix Input to power your ProSpeed and you want to power a second ProSpeed with the same power supply...

This is an Authentic Phoenix Contact 1804904 2 conductor connector. It is the replacement connector for the ProSpeed 4-LITE's DC input connector.This is the not an offshore imitation, enjoy the best build quality, best Quality Assurance in the business and their Canadian and US UL Certification. ..

This 3 conductor 18awg wire is perfect for making extensions for your LED ribbon or custom fixtures.Specifications:18awg3 conductorsstranded tinned copper 16/30300m (984ft.) per boxJacket colour: greyJacket material: PVCNominal OD: 5.3mm (0.209in.)600V RatingFT4CSA and UL Certifications..

Our 12vDC ProColour ProForm Ultra High CRI dual-flex LED Ribbon allows you to get ProColour's High CRI emitters into tighter spaces on a tighter bending radius. It is available in both Cool White (Daylight) and Warm White (Tungsten) versions.ProFlex may also be known as "snake ribbon", "zig zag ribb..

This is an Authentic Phoenix Contact 1804933 5 conductor connector. It is the replacement connector for the ProSpeed 4-LITE's output connector.This is the not an offshore imitation, enjoy the best build quality, best Quality Assurance in the business and their Canadian and US UL Certification. A..

The ProPix 72 AI RGB LED strip uses APA-102 RGB emitters to give you individual pixel control  of each LED individually. These strips use the hard to find original APA-102 LED emitters which are superior to the APA-102C chips that were built as their cheaper successor.When powered by one or mor..

This 6 conductor 18awg wire is perfect for making extensions for your LED ribbon. We recommend using the additional 18awg conductor as a second +Vdc line.Specifications:18awg6 conductorsfoil shield and drip wire (may be substituted with un-shielded wire based on availability)stranded tinned copper 1..

The ProStick Wx1 LED fixture is available in multiple lengths, with your choice of LED Colour Engine.Our high quality ProStick Wx1 fixtures are built to last, using our high quality ProColour LED ribbon as the light engine. They have fantastic colour rendition and can easily fit into tight p..

Our curved silicone diffuser allows you to pull any of our single width ribbons into it, giving excellent soft and flexible lighting strips. Included with every 5m roll are 6 mounting brackets and two sets of end caps. 10m rolls come with 12 clips and 4 sets of end caps.An inner and outer silicone d..

The moulded XLR-5 to RJ45 adapters come in the following configurations:Male XLR-5 to RJ45RJ45 to Female XLR-5orA pair including one Male XLR-5 to RJ45 adapter and one RJ45 to Female XLR-5 adapterThe moulded one piece 5-pin XLR to RJ45 adapters can quickly and easily convert any CAT-5 or better Ethe..

The Swisson XSR Series RDM and DMX Opto-Splitters use optical isolation to completely isolate and boost both DMX and RDM signals. The isolation prevents signal disturbances on separate outputs from affecting other outputs or travelling back through to the input signal connectors.Each isolating devic..

The Swisson XPD-28 Opto-Splitter can split and isolate two (2) separate universes of DMX and RDM data to any of its eight (8) optically isolated outputs. While splitting the DMX and RDM data the XPD-28 also boosts and refreshes the data signals in real-time.The XPD-28 is completely is compatible wit..