Project SSSHH Incorporated

This is our first rigid mini-module to hit the market is a 12Vdc 38mm x 38mm 95+CRI 2700K to 6000K Variable White module.These are excellent for retrofitting fixtures or to simply use as a fixture on their own. They can be mounted by using a #6 pan head screw through the central hole or in any two o..

Our new 12Vdc NiMH battery packs are assembled and tested in the USA. They all have self resetting PolySwitch protective devices and are fitted with 5.5 x 2.1 male barrel connectors.A number of sizes and capacities are available: CapacityTypeMax CurrentWatt HoursDimensions 800mAhFlat Pack1.69.6Wh4..

12W Variable White PRO-L16 BINNED Lots12V 12W Variable White PRO-L16s are now available in binned lots!The PRO-L16 VW is a camera safe CCT tunable LED MR-16 fixture. These variable white PRO-L16s have been grouped into binned lots and come complete with Type A trim rings. A ProSpeed 4-LITE DMX Dimme..

The ProColour RGB+TD LED strip is a high CRI LED tape with Red, Green, Blue, Tungsten and Daylight all-in-one emitters . With a CRI of >95 and a CCT range of 2700K to 6000K this strip will allow you to mix any colour under the sun or have colour correctable high-CRI whites all from one source!Availa..

-24Introducing our new ProColour-24 24Vdc 96/m All-in-one RGBA Ribbon!Packing Red, Green, Blue and Amber led emitters into a single chip allows ProColour-24 RGBA ribbonto deliver a full spectrum of bright colourful light with extremely even distribution. The additional Amber emitter allows for bette..

Your search is over! The well built, properly approved budget conscious 5.08mm connectors are right in front of you.These connectors have excellent screw retention, allowing the gates to remain open during shipping. This means you won't have to unscrew all of the gates before you put wire into these..

The PS-EXT-BR-001 Aluminum Bar Extrusion will hold either our single or double width ribbon. The PMMA diffusion blends the light emitted from ProColour ribbon, creating a soft smooth glow.Each 4' length comes with two end caps (one with a hole for wire) and two cable clips.Order additional end caps ..

-24Introducing our new ProColour-24 24Vdc 96/m All-in-one RGBW Ribbons!Available in RGB+Tungsten (2700K), RGB+NW (4000K) and RGB+Daylight formulations our new 24Vdc 96 emitters per meter all-in-one full spectrum LED ribbons are now available for order. Offering full spectrum RGB colour mixing with h..

The smaller cousin of the 5.08mm Cine-Value Pluggable Connectors are 3.81mm pitch and rated at 8a per connection.These connectors have excellent screw retention, allowing the gates to be open during shipping. This means you won't have to unscrew all of the gates before you put wire into these connec..

Custom LED Shop work includes, but is not limited to:SolderingCable CreationCrimpingElectronics RepairCustom LED Shop work is billed out at $75.00/hr with a 1 hour minimum charge.We can repair most issues that may arise with your DMX LED Decoders in the field as well as build custom cable assemblies..

Introducing the new PRO-L16The 12W and 8W 12vDC RGB+Tungsten or RGB+Daylight versions are now available!The PRO-L16 is a camera safe colour tunable LED MR-16 fixture that is available in RGB+Tungsten and RGB+Daylight versions which can be dimmed flicker-free with any camera safe PWM LED dimmer.Avail..

The ProSpeed 4-LITE DMX LED DimmerThe ProSpeed 4-LITE is a high speed flicker-free LED Dimmer, which offers extremely low and stable output levels. Controllable via DMX-512A protocol, or manually, the ProSpeed 4-LITE also supports Remote Device Management (RDM) when connected to a RDM ca..