All Products

Our new 12Vdc NiMH battery packs are assembled and tested in the USA. They all have self resetting PolySwitch protective devices and are fitted with 5.5 x 2.1 male barrel connectors.A number of sizes and capacities are available: CapacityTypeMax CurrentWatt HoursDimensions 2200mAhFlat Pack4A26.4Wh..

-24Introducing our new ProColour-24 24Vdc 96/m All-in-one RGBA Ribbon!Packing Red, Green, Blue and Amber led emitters into a single chip allows ProColour-24 RGBA ribbonto deliver a full spectrum of bright colourful light with extremely even distribution. The additional Amber emitter allows for bette..

We have been searching for well built off-shore 5.08mm connectors for a few years and have finally found one that meet stringent our criteria.These connectors have excellent screw retention, allowing the gates to be open during shipping. This means you won't have to unscrew all of the gates before y..

The PS-EXT-BR-001 Aluminum Bar Extrusion will hold either our single or double width ribbon. The PMMA diffusion blends the light emitted from ProColour ribbon, creating a soft smooth glow.Each 4' length comes with two end caps (one with a hole for wire) and two cable clips.Order additional end caps ..

-24Introducing our new ProColour-24 24Vdc 96/m All-in-one RGBW Ribbons!Available in RGB+Tungsten or RGB+Daylight formulations our new 24Vdc 96 emitters per meter all-in-one full spectrum LED ribbons are now available for order. Offering full spectrum RGB colour mixing with high-CRI whites allows you..

The smaller cousin of the 5.08mm Cine-Value Pluggable Connectors are 3.81mm pitch and rated at 8a per connection.These connectors have excellent screw retention, allowing the gates to be open during shipping. This means you won't have to unscrew all of the gates before you put wire into these connec..

Custom LED Shop work includes, but is not limited to:SolderingCable CreationCrimpingElectronics RepairCustom LED Shop work is billed out at $75.00/hr with a 1 hour minimum charge.We can repair most issues that may arise with your DMX LED Decoders in the field as well as build custom cable assemblies..

Introducing the new PRO-L16The 12W and 8W 12vDC RGB+Tungsten or RGB+Daylight versions are now available!The PRO-L16 is a camera safe colour tunable LED MR-16 fixture that is available in RGB+Tungsten and RGB+Daylight versions which can be dimmed flicker-free with any camera safe PWM LED dimmer.Avail..

The ProSpeed 4-LITE DMX LED DimmerThe ProSpeed 4-LITE is a high speed flicker-free LED Dimmer, which offers extremely low and stable output levels. Controllable via DMX-512A protocol, or manually, the ProSpeed 4-LITE also supports Remote Device Management (RDM) when connected to a RD..

The PS-EXT-RO-001 Rounded Extrusion will hold our single width ribbon. The PMMA diffusion blends the light emitted from ProColour ribbon, creating a soft smooth glow.Each 4' length comes with two end caps (one with a hole for wire) and two clips.Additional clips and end caps are available using opti..

The Swisson XRC-200 is capable or recording and playing back up to two (2) universes of DMX data. The XRC-200 can be used for single button cue playback, making it an ideal solution for work-lighting sets with complex lighting. It can also be used for pre-programmed lighting effect playback and emer..

The Swisson XWL series Wireless DMX transmitters and receivers are capable of transmitting DMX-512A using LumenRadio’s CRMX without the use of wires up to 500m with the correct installation and line of site conditions. The XWL transmitter can reliably transmit the DMX data wirelessly with a latency ..